Learn the Three Basic Types of a New or Used Filter Press

Industries that use solid/liquid separation processes but wish to control costs may benefit from buying a used filter press or other previously owned equipment, rather than purchasing new. The gear has a very simple design of a plates and horns. It uses a pressure drive to process predetermined amounts of liquid or slurry material in batches, and stops to discharge a "cake" until the next batch is begun.
Get More Info here Filtertechnik

When looking for a used filter press, You Will Discover there are three Major types:

Plate and Frame

This is the most elementary design. It is also referred to as a "membrane filter plate" and includes plates, frames, and support rails. Additionally, it includes a centrifuge pump which prevents solids from settling to the system and gives aid throughout the separating chambers in the gear. Each chamber includes a hollow framework that's separated from two plates through fabric. A cake accumulates as the slurry passes through each framework. Since the cake thickens, the immunity causes the system to impede. It quits when the room has filled, and the desired pressure gap is attained. The frame and plate are all pulled apart, and the cake has been discharged. After every release, every fabric is cleaned using a special wash solution, and also the equipment is prepared to begin another cycle.


This type is constructed of the exact same primary components. However, as its name implies, its operations are fully automated. It features larger plates and frames using mechanical plate shifters. The shifters rapidly move the plates so that the cakes could be discharged quickly. This kind generally incorporates security shutdown mechanisms. When there's not enough clamping pressure, then the system will shut down, preventing escapes between the plates. Additionally, it has a compressor at the filter plates that assists with drying the cakes. The automated features permit the equipment to operate more efficiently, reducing disposal costs and operator time and increasing the life span of the fabric and pumps.


This type includes polypropylene squares with a concave depression and center hole. Two plates form a chamber to pressurize the slurry by means of a fabric liner into a chamber. It may hold up to 80 plates side by side, depending on how much capacity is necessary. The main difference between this type and the plate and frame type is that, together with all the brightly model, the way in which the plates are joined allows the cake to form in the recess of every plate. This feature limits the cake dimensions to be no longer than 32mm unless additional frames are utilized for separation. With this process, nevertheless, cloth changing takes more, leading to longer processing times between bicycles. Additionally, it cannot use filter newspapers, and may lead to uneven cakes.

Which kind of gear is used is dependent upon the expected capability going through the system, the operator experience, funding, and basic facility preferences. When operated properly, a used filter media will last many years and need little maintenance. Industries that need this type of gear but are concerned about costs may find purchasing pre-owned systems are the ideal alternative.

Get More Info here Filterpresse gebraucht